Skip to content
Availability:
Estimated Arrival: Between Nov 25 and Dec 02. *ETA to the USA Only
The POP 3 Inflatable Sea Pool is also a foundation piece for waterfront AquaBanas Systems. The design allows the pool frame to be used to support AquaBanas decks on yachts for many different uses including sun and shade areas with the many optional banas and tents. The netting can help protect from sea creatures and jellyfish.
See All Yacht Pools Here
See All Aquabanas Luxury Platforms Here
See All Yacht Toys Here
For Questions & Customizations Call Andi: "Tel: 706.619.6670" andi@lightasairboats.com
Take a refreshing dip in our POP 3 Inflatable Sea Pool while enjoying a day on your luxury boat or yacht. Deploying and retracting a pool from your boat can be challenging, but the POP 3 is designed to simplify the entire experience with easy setup, removal, and storage.
The POP 3 has an innovative design that breaks the inflatable pool into three manageable parts, making it much easier to handle. Our pool system is easy to assemble, and pack up, and can be stored in separate locations for maximum convenience.
Features
☑ BanaGrip non-slip surface
☑ Made in 3 pieces for easy handling
☑ Drop stitch construction to maintain item shape and provide stability
☑ Hot air welded vs glued for best-in-class durability
☑ Low profile Quick Step for easy boarding from the water
☑ Anchoring and mooring points underneath
☑ Standardized connections offer unlimited modularity and customization
☑ Removable jellyfish netting with netted bags (sea weights for bags are not included)
☑ Designed for yachts and resorts
Specs
☑ Weight: 563 lbs (213 kgs)
☑ Stored: 48" x 40" x 54" (122 cm x 102 cm x 137 cm)
☑ Inflated: 26'3" x 22'4" x 8' (800 cm x 680 cm x 244 cm)
Includes
☑ Inflation Kit and Connection Kits.
NOTE: The Floating Quick Step shown in the image is additional and will not be included with this product.
How AquaBanas Work
AquaBanas have a modular design that allows them to operate as a single unit or to be seamlessly connected to form larger Bana Systems. There are 3 Foundation Banas that are instrumental in creating an AquaBanas system:
STANDARD FEATURES:
☑ Inflated Back Rests
☑ Gator Mouth Flaps
☑ Anchor Rings For Tent
☑ Non-Slip Top Surface
☑ Quick-Step Access
☑ Stable Ballast Bags
☑ Dual Inflation Valves
☑ Netted Footwells
☑ Rock Solid Table
☑ Cooler Cut-Out
All AquaBanas decks and components use a standardized connection system that has (2) D-Rings located 80” apart. Each set of these D-Rings features a 120” wide Gator Mouth flap that firmly holds a non-slip Gap Cap material that prevents anyone from stepping through the butted seam. The decks are held together primarily with (2) chains of #316 Stainless Steel Quick Link connectors connected to the rings. The chains are then covered with a wrap.
Welded Construction
All AquaBanas products are built to the highest commercial inflatable standards including full welding of all drop stitch products. Welded seams eliminate any possibility of seam failure that many drop stitch products are prone to.
Also, an additional layer of vinyl material is added to every seam, along with our trim strip material for added strength.
OPTIONAL EXTRA
Bravo 2000 is a dual motor pump that puts out 2000 liters of air per minute and can generate 5psi of air pressure. 2-meter hose (Available in 120v or 230v)
How to set up?
*Because these are highly specialized products and will sell out, the manufacturer does not accept returns*
Please see Aquabanas FAQs here