Estimated Arrival: Between Sep 26 and Oct 03. *ETA to the USA Only
PWC BOB Bana has versatile storage solutions for personal watercraft, SEABOB®s, e-foils, and sports gear of all types on the deck! It easily connects to other Banas or it can be anchored directly to the seabed. Also with quick Step and ballast bags for stability. Get yours now!
The PWC BOB Bana is a must-have for any recreational vehicle enthusiast. This impressive Bana can hold up to 1 PWC, 2 SEABOB®s, and 1 E-Foil with a sturdy non-slip top to prevent falls.
The PWC BOB Bana makes it easy to store and deploy your vehicles so you can always be ready when adventure strikes! Add the Bravo 2000 pump to streamline setup (sold separately).
☑ Bana-Grip Non-Slip surface
☑ Ballast bags for unrivaled stability
☑ Quick Step for easy boarding from the water
☑ Drop stitch construction to maintain item shape and provide stability
☑ Hot wielded vs glued for best in class durability
☑ Anchor and moor points underneath
☑ Velcro flaps to connect banas for Unlimited modularity and customization
☑ Weight: 96 lbs (44 kgs)
☑ Stored: 46" x 30" x 11" (117 cm x 76 cm x 28 cm)
☑ Inflated: 132" x 132" x 28" (340 cm x 340 cm x 70 cm)
☑ PWC BOB Bana
How AquaBanas Work
AquaBanas have a modular design that allow them to operate as a single unit or to be seamlessly connected together to form larger Bana Systems. There are 3 Foundation Banas that are instrumental in creating an AquaBanas system:
☑ Inflated Back Rests
☑ Gator Mouth Flaps
☑ Anchor Rings For Tent
☑ Non-Slip Top Surface
☑ Quick-Step Access
☑ Stable Ballast Bags
☑ Dual Inflation Valves
☑ Netted Footwells
☑ Rock Solid Table
☑ Cooler Cut-Out
All AquaBanas decks and components use a standardized connection system that has (2) D-Rings located 80” apart. Each set of these D-Rings features a 120” wide Gator Mouth flap that firmly holds a non-slip Gap Cap material that prevents anyone from stepping through the butted seam. The decks are held together primarily with (2) chains of #316 Stainless Steel Quick Link connectors connected to the rings. The chains are then covered with a wrap.
All AquaBanas products are built to the highest commercial inflatable standards including full welding of all drop stitch products. Welded seams eliminate any possibility of seam failure that many drop stitch products are prone to.
Also, an additional layer of vinyl material is added to every seam, along with our trim strip material for added strength.
Bravo 2000 is a dual motor pump that puts out 2000 liters of air per minute and can generate 5psi of air pressure. 2 meter hose (Available in 120v or 230v)
How to set up?
*Because these are highly specialized products and will sell out, the manufacturer does not accept returns*
Please see Aquabanas FAQs here