Skip to content
Availability:
Estimated Arrival: Between Apr 03 and Apr 06. *ETA to the USA Only
$100 OFF Stryker Boats! Use Code [100OFF]
Questions? Call Dave - "Tel: 864.367.6161" dave@lightasairboats.com
The perfect boat for you and your group! Pack a ton of gear or up to 10 people and travel where other boats can't go!
See All Stryker Boats Here.
See All Inflatable Boats Here.
The Stryker PRO 420 inflatable boat comes with the added protection of 1.8mm wrapped with our Stryker Shield® under the entire bottom of the boat. There is no other comparable boat on the market today. We add a 20” transom for the ability to add a JET outboard for extreme shallow water use. Please note: this model requires a 20” prop motor. This is the perfect inflatable boat for a large group of adventure seekers paired with a 20HP long shaft (prop) outboard or a 35HP JET.
☑ Bow Bag
☑ Seat Bag
☑ Repair Kit
☑ 2 x Aluminum Bench Seat ☑ Boat Bag
☑ Floor Bag
☑ Essentials Bag ☑ 2 x Scotty Baitcaster
☑ Aluminum Oars
☑ Rod Holders
☑ Bimini
1. STRYKER LAUNCHING WHEELS
Dualies
A favorite design to date. Launching wheels are a popular choice for many of Stryker's customers. They allow you to easily launch your boat, transport it short distances and protect your boat from abrasives. Rated for up to 600lbs.
2. Bravo BTP Two-Stage 12V Electro Turbo Pump
The BP 12 is a one-stage pump (high pressure/low volume) that only produces 150 liters per minute (150 L/min). The BTP 12 is two-stage and produces 450 L/min (low pressure/high volume) until it gets to about 1 PSI and then switches to 150 L/min (high pressure/low volume)
3. Bait Caster Rod Holder with Mount
Scotty’s Bait Caster/ Spinning series of rod holders hold a bait caster reel in a cushioned cradle and allow for a spinning reel to be securely held in position. The side mounted flange design of the rod holder accommodates rod trigger grips. Pistol grip rod butts easily clear the sides of this rod holder for quick and easy rod retrieval.
This is How Stryker Boats Roll on Instagram
×
☑ Entirely Thermowelded Seams
☑ Aluminum Transom
☑ 1.8mm Underbelly
☑ 1.8mm Protective Seat Patches
☑ Stryker ShieldTM Keel Strake
☑ Stryker ShieldTM Under Tubes
☑ 7 x Scotty Mount Pads
☑ Anti Over-Inflation Safety Valve
☑ Reinforced Tube to Transom
☑ Complete Peripheral Life Line
☑ Exterior Water Redirecting Strake ☑ D Handle @ Bow
☑ Tow Rope
☑ 2 Tow Rings
☑ Oar Locks
☑ Oar Holders
☑ One Way Drain Valve
☑ 6 Carry Handles
☑ 10 Interior D Rings
☑ Aluminum Engine Mounting Plate
☑ Gas Tank Pad & Belt
☑ Bimini Mounts & D-Rings
☑ Overall Length: 420cm or 13′ 7″
☑ Inside Length: 290cm or 9′ 5″
☑ Overall Width: 190cm or 6′ 2″
☑ Inside Width: 90cm or 2′ 10″
☑ Weight: 280 lbs
☑ Tube Diameter: 50cm or 1′ 6″
☑ # of Air Chambers: 6
☑ PVC Thickness: 1.8mm & .9mm
☑ Max Load: 1360kg or 2998lbs
☑ Max # people: 10
☑ Max Motor: 40 HP
☑ Max Motor Weight: 119kg or 262 lbs
☑ Transom Height: 20”
☑ Max Tube Pressure: 3.6 psi
