Skip to content
Availability:
Estimated Arrival: Between Feb 12 and Feb 15. *ETA to the USA Only
$100 OFF Stryker Boats! Use Code [100OFF]
Questions? Call Dave - "Tel: 864.367.6161" dave@lightasairboats.com
Headed into shallow water? No problem with the Pro 320! The 20" transom allows you to add a Jet Outboard to take you where you need to go!
See All Stryker Boats Here.
See All Inflatable Boats Here.
The Stryker PRO 320 inflatable boat comes with the added protection of 1.8mm wrapped with our Stryker Shield® under the entire bottom of the boat. There is no other comparable boat on the market today. We add a 20” transom for the ability to add a JET outboard for extreme shallow water use. Please note: this model requires a 20” shaft outboard (long shaft). This is the perfect inflatable boat for 2 adventure seekers paired with a 9.8HP long shaft outboard.
☑ Bow Bag
☑ Seat Bag
☑ Repair Kit
☑ 2 x Aluminum Bench Seat ☑ Boat Bag
☑ Floor Bag
☑ Essentials Bag ☑ 2 x Scotty Baitcaster
☑ Rod Holders
☑ Bimini
☑ 2 Aluminum Oars
1. STRYKER LAUNCHING WHEELS
Dualies
A favorite design to date. Launching wheels are a popular choice for many of Stryker's customers. They allow you to easily launch your boat, transport it short distances and protect your boat from abrasives. Rated for up to 600lbs.
2. Bravo BTP Two-Stage 12V Electro Turbo Pump
The BP 12 is a one-stage pump (high pressure/low volume) that only produces 150 liters per minute (150 L/min). The BTP 12 is two-stage and produces 450 L/min (low pressure/high volume) until it gets to about 1 PSI and then switches to 150 L/min (high pressure/low volume)
3. Stryker Boats Scotty Bait Caster Rod Holder with Mount
Scotty’s Bait Caster/ Spinning series of rod holders hold a bait caster reel in a cushioned cradle and allow for a spinning reel to be securely held in position. The side mounted flange design of the rod holder accommodates rod trigger grips. Pistol grip rod butts easily clear the sides of this rod holder for quick and easy rod retrieval.
This is How Stryker Boats Roll on Instagram
× 
☑ Entirely Thermowelded Seams
☑ Aluminum Transom
☑ 1.8mm Underbelly
☑ 1.8mm Protective Seat Patches
☑ Stryker ShieldTM Keel Strake
☑ Stryker ShieldTM Under Tubes
☑ 7 x Scotty Mount Pads
☑ Anti Over-Inflation Safety Valve
☑ Reinforced Tube to Transom
☑ Complete Peripheral Life Line
☑ Exterior Water Redirecting Strake ☑ D Handle @ Bow
☑ Tow Rope
☑ 2 Tow Rings
☑ Oar Locks
☑ Oar Holders
☑ One Way Drain Valve
☑ 6 Carry Handles
☑ 10 Interior D Rings
☑ Aluminum Engine Mounting Plate
☑ Gas Tank Pad & Belt
☑ Bimini Mounts & D-Rings
☑Overall Length: 320cm or 10′ 5″ ☑ Boat only weight: 129lbs
☑ Inside Length: 212cm or 6'9"
☑ Overall Width: 152cm or 4'10"
☑ Inside Width: 66cm or 2'2"
☑ Shiping Weight: 180 lbs
☑ Tube Diameter: 43cm 1′ 4″
☑ # of Air Chambers: 6
☑ PVC Thickness: 1.2mm & 1.8mm ☑ Max Load: 1025kg or 2054lbs
☑ Max # people: 5
☑ Max Motor: 15 HP
☑ Max Motor Weight: 119kg or 132 lbs
☑ Transom Height: 20”
☑ Max Tube Pressure: 3.6 psi ☑Dimensions of boat in bag: 44 x 28 x 14" ☑ Dimensions of Aluminum Floor in bag: 43 x 25 x 4"
