Additional costs and important information associated with importing your Stryker Boat.
Shipping is $450.
Fees and taxes are paid by the customer
Duty Cost on Boat– Customs charges 2.4% of the value of the boat. Typically this ranges from $100-$250
Duty Cost on Accessories – This could range from 0-20%. Some accessories are not charged an import fee at all. Others like wheels could be 20%
Import taxes are charged directly by carrier (DHL) and submitted to US border services. Sometimes the carrier will require your IRS/SS# for import purposes.
The customer receiving the boat may be asked to supply their Social Security Number to customs.
State taxes vary from state to state. Your state may charge tax before delivering your boat.
You will need to register your boat.
15% Off Bixpy Adaptors [BIXPY15]$200 OFF Water Bikes [FITFUN]$400 Off Seabobs [SEAABOB4ME]$80 Off SOL SUPs [SOL80]$400 Off Aquabanas Party & Picnic Banas [LUX400]
Questions? Call Dave - "Tel: 864.367.6161" dave@lightasairboats.com
Introduced by Popular Demand. Pair this boat with a 9.9hp outboard motor for the perfect yacht tender! Backed by Stryker Boat's best in the industry warranty!
The Stryker LX 270 was introduced in 2019 by popular demand. This boat offers 16” tubes like the Stryker LX 320, but in the size that is still suitable as a yacht tender for most customers. The ability to pair this inflatable boat with a 9.9hp outboard is a key feature.
☑Foot Pump (Hand Pump for Air Mats) ☑Bow Bag ☑Seat Bag ☑Repair Kit ☑ 2 x Aluminum Bench Seat ☑Boat Bag ☑Floor bag ☑Under Seat Bag ☑Aluminum ☑Oars
1. STRYKER LAUNCHING WHEELS
Standard
Launching wheels are a popular choice for many of Stryker's customers. They allow you to easily launch your boat, transport it short distances and protect your boat from abrasives. Rated for up to 300lbs.
CAUTION: The launching wheels are not designed to be towed behind a vehicle. Damage may occur and will void the warranty.
2. BRAVO BTP TWO-STAGE 12V ELECTRO TURBO PUMP
The BP 12 is a one-stage pump (high pressure/low volume) that only produces 150 liters per minute (150 L/min). The BTP 12 is two-stage and produces 450 L/min (low pressure/high volume) until it gets to about 1 PSI and then switches to 150 L/min (high pressure/low volume)
This is How Stryker Boats Roll on Instagram
×
☑Entirely Thermowelded Seams ☑Aluminum Transom ☑1.2mm Underbelly ☑1.2mm Protective Seat Patches ☑Stryker Shield™ Keel Strake ☑Stryker Shield™ Under Tubes ☑5 x Scotty Mount Pads ☑Anti Over-Inflation Safety Valve ☑Reinforced Tube to Transom ☑Complete Peripheral Life Line ☑Exterior Water Redirecting Strake ☑D Handle @ Bow ☑Tow Rope ☑2 Tow Rings ☑Oar Locks ☑Oar Holders ☑One Way Drain Valve ☑ 4 Carry Handles ☑6 Interior D Rings ☑Aluminum Engine Mounting Plate ☑Gas Tank Pad & Belt ☑Bimini Mounts & D-Rings
☑Overall Length: 270cm or 8′ 9″ ☑Inside Length: 170cm or 5′ 5″ ☑Overall Width: 145cm or 4′ 7″ ☑Inside Width: 64cm or 2′ 1″ ☑Weight: Air Floor- 98 lbs ☑ Weight:Aluminum Floor 118 lbs ☑Tube Diameter: 41 cm or 1′ 3″ ☑# of Air Chambers: 4 PVC ☑Thickness: 1.2mm & .9mm ☑Max Load: 517kg or 1139lbs ☑Max # people: 4 ☑Max Motor: 10 HP ☑Max Motor Weight: 60kg or 132lbs ☑Transom Height: 15”
☑ Dimensions of Boat in Bag 43" x 22" x 12"
☑Dimensions of Aluminum Floor in Bag: 36" x 24" x 4" ☑Max Tube Pressure: 3.6 psi