Skip to content
Availability:
Estimated Arrival: Between Mar 29 and Apr 01. *ETA to the USA Only
It's no wonder these sleek and innovative Piling Bumper Pads are one of our bestsellers! Our low-profile, Piling Pad provides maximum impact and scuff protection in a compact, attractive package.
Available in three (3) sizesFor pilings 6" to 10" in diameter, in any material: wood, concrete, polymer, steel, etc.
Premium materials, with heat-welded seams ensure durable, long-lasting performance
Easy to install with stainless steel bolt head screws (included)
Or install with Cam Strap Fasteners (sold separately) to slide Piling Pad up or down during tidal fluctuations, and to remove seasonally if desired
Watch installation video here
Custom orders available
Sizing recommendation: Piling Pad size (small, medium, large) corresponds to the size of your boat or the intensity of traffic expected. Bigger boats and higher traffic docks should opt for medium or large sizes.
The small and medium Piling Pads (1" thick) will lightly bend and conform to the piling. Large Piling Pads (3" thick), which will not bend to shape, and have additional outer fabric (“wings”) for a taut, clean installation.
Your boat is an investment. Trust it with a premium fender.
Why Impact Fenders?
As opposed to inflatable boat fenders or traditional round boat fenders, Impact Fender's flatboat fenders are enclosed with high density, closed-cell recycled polyethylene foam. That means that their fenders can withstand repeated pounding without breaking down so that their boat fenders are durable and long-lasting for an exceptional value.
Inside the patent-pending, the medium bendable fender is a pliable material sandwiched between the closed-cell recycled polyethylene foam and then wrapped with PVC coated polyester. This provides a malleable boat fender that you can shape to your boat hull or around the gunnel. This means you can get the same performance from a low profile, form-fitting product without the large boat bumpers or big fenders of the past.
Each fender has stainless steel grommets positioned to attach to any surface for your boats' ultimate protection and comes with one-inch polypropylene webbing with a faster clip to secure the fender to any cleat, railing, tower, or handle at any length to protect your boat.
Impact Fenders are also currently working with the US Coast Guard to have their fender used as a Type 4 throwable required on all boats 16 feet and over. The fenders stack and store easily and can be used as seat cushions, in the boat, and out of the boat. The bendable fenders can also be used for lumbar support while towing your favorite person.
☑ Available in three (3) sizes
☑ For pilings 6" to 10" in diameter, in any material: wood, concrete, polymer, steel, etc.
☑ Premium materials, with heat-welded seams ensure durable, long-lasting performance
☑ Easy to install with stainless steel bolt head screws (included)
☑ Or install with Cam Strap Fasteners (sold separately) to slide Piling Pad up or down during tidal fluctuations, and to remove seasonally if desired
Custom orders available
Sizing recommendation:
Piling Pad size (small, medium, large) corresponds to the size of your boat or the intensity of traffic expected. Bigger boats and higher traffic docks should opt for medium or large sizes.
The small and medium Piling Pads (1" thick) will lightly bend and conform to the piling. Large Piling Pads (3" thick), which will not bend to shape, and have additional outer fabric (“wings”) for a taut, clean installation.
IMPACT Piling Pads (width x height x thickness)
- Small: 8 in x 2 ft x 1 in (1 pound)
- Medium: 8 in x 4 ft x 1 in (2 pounds)
- Large: 8 in x 4 ft x 3 in (5 pounds)
*Dimensions reflect the interior, closed-cell foam, and general protective coverage once installed. Overall product dimensions are slightly larger. Custom sizes and orders are available.
MATERIAL DETAILS
Thoughtful design is the foundation for every IMPACT product. Adding premium materials to that design is where the magic happens!
OUTER MATERIAL:
- Heavy-duty, 32-oz. PVC-coated polyester
- 1,000 denier woven polyester with durable poly-vinyl-chloride coating
- Massive tensile strength, puncture resistance, and abrasion resistance ensures durability and longevity
- UV and fade-resistant
- Resistant to dirt, oil, salt, mildew, and most chemicals
- Won’t scratch gelcoat or paint
- Won’t color transfer
INTERIOR AND MATERIAL:
- Recycled, high-density, closed-cell foam interior
- Doesn’t absorb water
- Continues to protect your boat in the unlikely event the outer material is torn or punctured
- Absorbs and disperses impact pressure across the entire surface area for smoother landings
OTHER MATERIALS:
- Marine grade, stainless steel grommets
- Stainless steel, bolt head screws (included)
- Optional: Silicone-Covered Cam Strap Fasteners can be purchased
CARE AND MAINTENANCE:
- Easy to clean, with gentle soap or Simple Green and water
- Treat 1 to 2 times per year with 303 Marine Protectant
Watch installation video here