Additional costs and important information associated with importing your Stryker Boat.
Shipping is $450.
Fees and taxes are paid by the customer
Duty Cost on Boat– Customs charges 2.4% of the value of the boat. Typically this ranges from $100-$250
Duty Cost on Accessories – This could range from 0-20%. Some accessories are not charged an import fee at all. Others like wheels could be 20%
Import taxes are charged directly by carrier (DHL) and submitted to US border services. Sometimes the carrier will require your IRS/SS# for import purposes.
The customer receiving the boat may be asked to supply their Social Security Number to customs.
State taxes vary from state to state. Your state may charge tax before delivering your boat.
You will need to register your boat.
$100 Off ALL NAISH Boards [SAVE100]$50 Off SUPS Over $600 [SUP50]15% Off Aquaglide! [SAVE15]
Free Shipping on Most Inflatables
The Flexboats TD8 Is The Perfect Boat For 4 Passengers. This Dinghy Has The Flexboat Signature Hypalon and Fiberglass Floor Planks & Transom! The Tender of choice for 4!
The TD8 is simple to roll up and store in a small space. It is very lightweight and its hydrodynamic design allows for good performance and bold maneuvers. Foldable, it fits in a carrying bag that comes with the product. The transom plate and the bottom planks are made of fiberglass thus increasing its durability even when exposed to bad weather.
FEATURES
☑ Boat ID label
☑ Triangular shaped stainless steel fixture in the bow, for towing, anchoring, and tying to the dock.
☑Stainless steel D ring in the bow ☑EVA padded fiberglass seat.
DESIGN & MATERIALS
☑ BOTTOM TYPE
Flat bottom with fiberglass planks and Hypalon fabric.
Materials: Transom plate and bottom planks consist of marine plywood encapsulated with reinforced fiberglass with orthophthalic polyester resin, reinforced with 450 g/m² of fabric and Coremat. Finishing in isophthalic gel coat with NPG and anti-UV.
☑ CUT VIEW
☑ DECORATION
The MINIFLEX S has safety lines (Life Line) on both sides of the boat.
☑ TRANSOM PLATE MASK
Flexboat has developed a fully fiberglass enclosed transom plate that resists the elements and lasts as long as the rest of the hull. In addition to that, a layer of Hypalon was added to make sure the engine will be attached to a firm and non-slippery surface.
☑ ENGINES The Maximum recommended horsepower is a 3.3 HP outboard motor. ☑ TUBES The tubes are built with the French fabric ORCA 820, a polyester of 1100 Decitex coated with synthetic rubber through a calendering process of the following 5 layers: Hypalon, neoprene, polyester, neoprene, neoprene. ( ISO-6185-3 and Solas 74 Convention certificates. ) Vulcanized rubber profiles around the tubes acting as fenders to protect the tubes during docking. Vulcanized bow label identifying the boat model. Vulcanized side labels at the stern with the FLEXBOAT logo.
SPECS
Maximum Recommended Engine is 5HP
PACKAGE INCLUDES
☑ Two aluminum paddles with nylon blades. Total lenght 3 ft 7 in.