Estimated Arrival: Between Jun 28 and Jul 01. *ETA to the USA Only
If you own an inflatable kayak or an inflatable stand-up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the Inflatables - WillFit™ Adapter for Inflatable Kayaks or standup paddleboards.
For inflatables that don’t have a slide-in fin, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue for attachment to the Bixpy J-1 PowerShroud™ Motor.
The fin plate does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing. The fin box material is PVC. So if you're gluing to a PVC surface, you can use a PVC to PVC adhesive. If you're gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive.
☑ Inflatables - WillFit™ Adapter
☑ All hardware required
☑ Wire to run to your Bixpy Outboard Battery
☑ Instruction card
☑ Additional features: Easily attached to your Bixpy J-1 PowerShroud™ Motor
☑ Cable length from motor connector end to adapter connector end: 4.3 feet (1.3 m)
Motor draft: 9" (23 cm)
☑ Adapter: Attach a fin box to the bottom of your kayak or stand up paddleboard and simply plug the adapter into the fin box
Protection: Water-proof, dirt-proof, and corrosion-resistant housing and components
Water use: Marine grade stainless steel components for salt water or fresh water use
Click here for installation guides and videos.