Estimated Arrival: Between Nov 02 and Nov 05. *ETA to the USA Only
Named after the legendary Blackfoot River in Montana, the Blackfoot ISUP is AquaGlide's fishing stand up paddle board for casual fishing enthusiasts and hardcore anglers.
With six Scotty mounts, the Blackfoot can be outfitted to tackle any angling mission. D-rings in all the right places make strapping down a cooler a cinch, and stability isn’t a concern given its 36″ width can handle loads of up to 450 lbs. Industry-leading stiffness is forged through the use of commercial-grade drop stitch. As an added bonus, the teak colored EVA top deck is designed with a special micro-texture to help with reduced slipping. The Blackfoot Angler ISUP board should be inflated to 14 – 18 psi for optimum performance.
☑ Angler Inflatable SUP
☑ Cascade Fin
☑ Carry Bag
☑ High-Pressure Hand Pump
☑ Repair kit
Three neoprene-padded handles – front, rear and center.
Front bungee deck lacing
measures 18 to 25 inches wide by 13 inches deep, with 6 cloth d-rings. The lacing starts 16 inches from the nose.
There are six integrated mounts (3 sets) to attach Scotty accessories
four are towards the nose and two towards the tail.
The mounts are 2.25 by 4.25 inches (pad is 5 x 7 inches) and use 4 each 1/4-20 x 7/8th stainless steel screws.
The screw locations are approximately 1.25 x 3.25 inches center-to-center. PLEASE NOTE THE SCREWS ARE NOT INCLUDED. AquaGlide states one can use 3/4 inch as well (but not longer than 7/8th inch without risk of puncture), though some users have reported that the 3/4 inch is not long enough.
The mount locations are as follows, and all are measured “center to center” of the mounts.
The mounts are 25.75 inches apart side-to-side. The first set is centered 36 inches from the nose, with the second set 54 inches from the nose (18 inches apart center to center) The rear mounts are centered 42.5 inches from the second set, approximately 34 inches from the tail.
A grooved EVA deck pad
Measures 70 inches long x 27.5 inches wide, beginning 43 inches from the nose and 17 inches from the tail. The handle begins 18 inches from the end of the front deck pad.
A printed 20-inch ruler (measuring 20 inches)
Located just forward of the deck pad. There are also centimeter and millimeter increments.
A second set of bungee deck lacing
is located at the rear, beginning over the deck pad for grip. This measures 24 to 27.5 inches wide by 13 inches deep, beginning about 16 inches from the tail.
Four stainless steel d-rings (two each side)
Located rear of the center handle, 27 inches apart side-to-side and 14 inches apart front to back; these are located 40 and 56 inches from the tail.
There is one military valve.
While there is no ankle leash d-ring, one can attach to the back handle or the side d-rings.
The included glass-filled tracking fin
Utilizes a US fin box and measures roughly 8 inches deep.
The “PowerStrip” – an additional layer of PVC reinforcement
Runs from nose to tail on the underside. This strip stiffens the area under the rider as well as providing an added layer of protection, without adding undue weight.
☑ Best For: Angling, Touring
☑ Capacity: 450 lbs. (204 kg)
☑ Warranty: 2-Year Limited
☑ Dimensions: 11′ x 36″ x 6″ (3.35 m x 0.91 m x 0.15 m)
☑ Weight: 28 lbs. (12,7 kg)
☑ Volume: 60.8 Gallons, 230 L
☑ Scotty Mount Screw Specs: 1/4-20 x 7/8″ length – Round Head (use #304 or #316 stainless)
+ Can pair with Aquaglide Fishing Cooler