Estimated Arrival: Between Oct 29 and Nov 01. *ETA to the USA Only
The Blackfoot Tandem Angler ISUP is AquaGlide's fishing stand up paddle board for casual fishing enthusiasts and hardcore anglers.
The Blackfoot Tandem iSUP is AquaGlide's fishing specific tandem inflatable standup paddleboard catering to both casual fishing enthusiasts and hardcore anglers. The tandem feature really lets you take your journey to the next level as it can fit two coolers and two anglers simultaneously. The tandem also has three universal mast mounts so that one or two sails can be attached to really make it the ultimate all around board.
The 14" Aquaglide Blackfoot Angler tandem inflatable SUP is perfect for recreationalists to take on RVs, cars, boats and plane travel. Take the Aquaglide Blackfoot Angler paddle board on your next vacation!
☑ Angler Inflatable SUP
☑ Cascade Fin
☑ Carry Bag
☑ High Pressure Hand Pump
☑ Repair kit
Seven carry handles - front, rear, center and two on each side rail.
Bungee deck lacing for attaching gear on bow
There are six integrated mounts (3 sets) to attach Scotty accessories
The mounts are 2.25 by 4.25 inches (pad is 5 x 7 inches) and use 4 each 1/4-20 x 7/8th stainless steel screws.
PLEASE NOTE THE SCREWS ARE NOT INCLUDED. AquaGlide states one can use 3/4 inch as well (but not longer than 7/8th inch without risk of puncture), though some users have reported that the 3/4 inch is not long enough.
The mount locations are as follows, and all are measured “center to center” of the mounts.
The mounts are 25.75 inches apart side-to-side. The first set is centered 36 inches from the nose, with the second set 54 inches from the nose (18 inches apart center to center) The rear mounts are centered 42.5 inches from the second set, approximately 34 inches from the tail.
A grooved EVA deck pad
Measures 70 inches long x 27.5 inches wide, beginning 43 inches from the nose and 17 inches from the tail. The handle begins 18 inches from the end of the front deck pad.
A printed 20-inch ruler (measuring 20 inches)
Located just forward of the deck pad. There are also centimeter and millimeter increments.
Multiple d-rings (12)
There is one military valve.
While there is no ankle leash d-ring, one can attach to the back handle or the side d-rings.
Three integrated threaded WindSUP mounts will accept most aftermarket windsurf sails.
Three removable tracking fins/fin box for increased performance
The “PowerStrip” – an additional layer of PVC reinforcement
Runs from nose to tail on the underside. This strip stiffens the area under the rider as well as providing an added layer of protection, without adding undue weight.
☑ With six Scotty® mounts within arms-reach, the Blackfoot can be outfitted to tackle any angling mission on your bucket list.
☑ D-rings in all the right places make strapping down a cooler or milk crate loaded with your tackle boxes a cinch, and stability isn’t a concern given its 36" width can handle loads of up to 450lbs with ease.
☑ Industry leading stiffness, which is crucial for efficient paddling and casting, is forged through the use of premium grade drop-stitch combined with their proprietary Powerstrip™ material.
☑ As an added bonus, the teak colored EVA top deck is designed with a special micro slitted texture to help with reduced slipping.
☑ The Blackfoot Angler iSUP board should be inflated to 14 - 18 psi for optimum performance.
☑ As a final touch, they used the US finbox system which allows you to change out or replace the fin by visiting the first paddle store you see.
☑ Once the day’s catch is packed in the cooler for the ride home, simply deflate, roll up, slide it into its backpack and throw it in the backseat or trunk.
This feature-rich board is the ideal paddling platform for the active angler or anyone looking for a great inflatable paddle board that can occasionally act as a fishing platform.
☑ Best For: Angling
☑ Capacity: 450 lbs. (204 kg)
☑ Warranty: 2-Year Limited
☑ Dimensions: 14′ x 36″ x 6″ (4.27 m x 0.91 m x 0.15 m)
☑ Weight: 39 lbs. (17,7 kg)
☑ Volume: 77.4 Gallons, 293 L
☑ Scotty Mount Screw Specs: 1/4-20 x 7/8″ length – Round Head (use #304 or #316 stainless)